Embedded QR Code Reader 2D OEM mini Fixed Mount Barcode Scanner
Module DP7628
Product introduction
DP7628 is a 2D mini high speed desktop scanner with advanced CMOS
image recognition technology.
It can easily read paper, goods, screen and other media 1D 2D
barcodes.
Widely used in kiosk, turnstiles, vending machines, ticket checking
machines.
> Mini size, wide-angle design, suitable for all kinds of mobile phone code scanning.
> Good reading performance with soft light fill light.
> Support online upgrade, customized development and secondary
development.
Product data sheet
| Scan Type | CMOS |
| Image sensor | 640*480 |
| Resolution | ≥4mil/0.1mm(PCS90%,CODE 39) |
| Decoding speed | 60cm/s |
| View | Horizontal 60°, vertical 50°, diagonal 72° |
| Depth of field | 10-150mm |
| Scan Mode | Auto sense, Command trigger, Continuous |
| Scan angle | Roll:±360°, Pitch:±60°, Yaw:±55° |
| Print Contrast Signal | ≥20% |
| Ambient Light | Dark environment, indoor natural light |
| Symbologies | 1D:UPC-A,UPC-E,EAN-8,EAN-13,Code 128, GS1-128, Code 39,Code 32,
Code 93,Code 11,Interleaved 2 of 5,Matrix 2 of 5,Industrial 2 of
5(Straight 2 of 5),Standard 2 of 5(IATA 2 of
5),Codabar(NW-7),MSI,GS1 Databar(Omnidirectional, Limited,
Expanded),China Post, Tepepen,GS1 Composite etc. 2D: QR Code, Micro QR Code, Data Matrix,PDF417, Micro PDF 417,
MaxiCode, Aztec,HanXin Code, etc. |
| Weight | ≈27g |
| Dimension | 50mm L* 40.2mm W * 17.3mm H |
| Communication way | USB(USB-KBW,USB-COM),TTL |
| Interface type | 12PIN Pitch 0.5 FFC cable |
| Power Supply | DC 5V@240mA(work) |
| Operating temperature | -20℃ to 50℃ |
| Storage temperature | -40℃ to 60℃ |
| Humidity | 5% to 95%(non-condensing) |
| Transport | 10H@125RPM |
12PIN interface
When you use 12pin pitch 0.5 interface, pin details as below.
| PIN# | Signal | Type | Definition |
| 1 | NC | - | NC |
| 2 | VIN | P | Power input DC 5V±5% |
| 3 | GND | P | ground |
| 4 | UART_RX | Input | TTL-RS232 receive,3.3V level |
| 5 | UART_TX | Output | TTL-RS232 send,3.3V level |
| 6 | USB_DM/D- | Input/output OuOOutput | USB_D- signal |
| 7 | USB_DP/D+ | Input/output | USB_D+ signal |
| 8 | NC | - | NC |
| 9 | BEEP | Output | Passive buzzer output signal, idle low level |
| 10 | LED | Output | Decoding successful prompt output signal, idle low level
Decoding successful prompt output signal, idle low level |
| 11 | NC | - | NC |
| 12 | TRIG | Input | Low level trigger, keep the low level for more than 20ms to trigger
code reading (external pull-up resistors or capacitors cannot be
connected) |
Data cable
DP7628 is equipped with a FFC cable connection with 12PIN at both
ends, one end is correspondingly connected to the scanner data
interface connector, the other one end is connected to the user
device.
The following picture is a schematic diagram.
Dimension
When using DP7628 for integrated application, you can refer to the
following physical size specifications. Unit: mm
Note: fixed hole diameter D=3.2
RFQ:
Q1. What’s your main products ?
- Laser Barcode Scanner
- Image CCD CMOS Barcode Scanner
- Barcode module
- Portable barcode scanner
- Handheld barcode scanner
- Desktop/flatbed barcode reader
- Ring type barcode reader
Q2. Are you a manufacturer?
Yes, our factory is located in Dongguan .
Q3. Do you have stock products to sell?
Yes, and we also work on OEM /ODM orders, customized your brand &
label as your requiment;
Q4. What's the time of delivery ?
It's subject to your order quantity and our production schedule .
Usually , 3-5 working days for sample, 12-15 working days for mass
production after receipt of payments .
Q5. What information should I let you know if I want to get a
quotation?
- The type you need, if possible, the specific product name
- Color & Interface
- Quantity of order
- Market of country
If possible, let us know if you have any experience on barcode
scanners business
Q6. Can I get a sample? And how can I get it? How many days will
samples be finished?
Yes, samples can be provided , but to be paid by customers. Sample
fee will be credit in formal order. Most of samples are in stock,
it takes 3-6 days by express delivery.
Q7. Do you inspect the finished products?
Yes, each step of production and finished products will be carried
out inspection by QC department before shipping.
Q8. What advantage do you have?
1. Full rang of barcode scanner products & Independent research and
development department,Supply OEM.
2. We are a manufacturer, and it ensures we have the ability to
carry out the production schedule for punctual delivery.
3. Strict QC. For each order, strict inspection will be carried out
by the QC department before shipping,
4. Certificates: Kinds of Invention Patents & CE&FCC&
ROSH&ISO900:2008 and so on;
